another question: i checked and i do have a 4S vin and i looked at the wires goin to my headlight and there are 5 separate wires goin into the clip where the bulb is and there's 3 on the rodeo clip. i'm stumped. what are the extra 2 wires to?

is there a ground wire to both the low and highbeams? and a separate ground?

thread bump

bump. please guys i need an answer! lol

finally got the front end done this past week. i'll post pics later. you guys said a truck with a VIN that started with 4S wouldn't have to have holes drilled but i guess i have some freak truck haha, because i had to drill holes in mine.

I love the Rodeo conversion....it makes the headlights flush which is what i like. Throw some pictures up so we can see.

sorry for the pic quality but here are some pics:

anybody know how the wires go i cant get mine wired up the right way one will be high and the other will be low i am so confused

the way i did it was if you look at the back of the rodeo lights there's 3 wires and there's i believe 5 wires going into the stock isuzu headlight harness. basically all i did was put one of those flat terminals on the ends of the wires on the rodeo lights and plugged them into the harness. the middle one on the rodeo lights goes to the middle one on the harness and the side ones go into the other sides, left to left, right to right. try that and see what happens.

i did that and one will be high and the other one will be low. it has been pissin me off for a week

i did that and one will be high and the other one will be low. it has been pissin me off for a week

try postin a pic of how you did it and lemme see if that helps me help you out.

i think i got it just waitiin for it to be dark so i can see if they are right.